| Announcements : Cleaning the Gusmer D-Gun: Part 8 a Clean Mix Module Picture the Result. |
|
| on Monday, September 04, 2006 - 12:24 PM MST - 2546 Reads |
 |
A clean Gusmer D-Gun Mix Module port is shown below. You have used your tip cleaner in conjunction with glycolic either and compressed air to remove foreign material from the block. After rinsing liberally with glycol and triggering with air you should see completely through the mix module when the trigger is held open and the D-Gun is placed towards the light right in front of your eye for proper inspection.
|
|
|
| |
Rate article |
This article has not been rated
|
|
|
 |
|
